₹8,250.00
Portability: Without the need for bulky gas cylinders, the welder is more mobile and convenient for working in different locations.
Outdoor welding: The flux provides its own shielding, which is not easily dispersed by wind. This makes it ideal for outdoor and windy conditions where traditional gas shielding would be ineffective.
Effective on thicker materials: Gasless welding tends to run hotter and offers better penetration, making it well-suited for welding thicker metals and structural steel.
Welds dirty and rusty metal: The flux can burn through some surface impurities, so less prep work is needed compared to gas-shielded welding.
Lower cost: The initial setup cost is cheaper since you don’t need to buy or lease gas cylinders and regulators.
PARAMETER UNIT Model – JMG-200
Welding Function MIG / MAG
Input Voltage V AC 220 + 15%
Frequency Hz 50/60
Phase Single
Max. power draw KVA 4.5 KVA
Current range Amps 40-200A
Operating voltage Volts DC 16-22V
Duty cycle (40ºC) % 60
Wire diameter mm 0.8/1.0 mm
Drive roll Size 0.8/1.0 mm
Wire Feed Speed(m/min) m/min 2.5-24
Efficiency % 85%
Degree of protection class IP21S
Insulation class F(155°C)
System of cooling Type Fan
Weight Kg 8
Related products
-
Sale!
Add to QuoteMIG welding , is an abbreviation for “Metal Inert Gas” which is more
formally known as “Gas Metal Arc Welding” or “GMAW”. The term MIG comes from
the original shielding gasses used that were the inert, or Nobel, gasses. Today
the gases used vary, so the name has officially been changed to “Gas Metal Arc
Welding”. MIG welding is the slang term that is commonly accepted. It is also
known as “Wire Wheel Welding”. This process uses a wire feed to feed solid
filler wire to the weld joint.MIG welding is an excellent choice for all types of metals, and with the
benefits of a single pass there is little need for any additional shielding
gas. As the weld shrinks, the gasses escape from the joint, leaving it fully
protected from oxidation and moisture. Using just one gas instead of both argon
and helium also saves you money in gas costs and limits the risk of leaks when
transporting or storing your equipment as there are no other gases needed to
store compared to arc welders and they reduce corrosion with no other gases
required. -
Sale!
Add to QuoteMIG welding , is an abbreviation for “Metal Inert Gas” which is more
formally known as “Gas Metal Arc Welding” or “GMAW”. The term MIG comes from
the original shielding gasses used that were the inert, or Nobel, gasses. Today
the gases used vary, so the name has officially been changed to “Gas Metal Arc
Welding”. MIG welding is the slang term that is commonly accepted. It is also
known as “Wire Wheel Welding”. This process uses a wire feed to feed solid
filler wire to the weld joint.MIG welding is an excellent choice for all types of metals, and with the
benefits of a single pass there is little need for any additional shielding
gas. As the weld shrinks, the gasses escape from the joint, leaving it fully
protected from oxidation and moisture. Using just one gas instead of both argon
and helium also saves you money in gas costs and limits the risk of leaks when
transporting or storing your equipment as there are no other gases needed to
store compared to arc welders and they reduce corrosion with no other gases
required. -
Sale!
Add to QuoteMIG welding , is an abbreviation for “Metal Inert Gas” which is more
formally known as “Gas Metal Arc Welding” or “GMAW”. The term MIG comes from
the original shielding gasses used that were the inert, or Nobel, gasses. Today
the gases used vary, so the name has officially been changed to “Gas Metal Arc
Welding”. MIG welding is the slang term that is commonly accepted. It is also
known as “Wire Wheel Welding”. This process uses a wire feed to feed solid
filler wire to the weld joint.MIG welding is an excellent choice for all types of metals, and with the
benefits of a single pass there is little need for any additional shielding
gas. As the weld shrinks, the gasses escape from the joint, leaving it fully
protected from oxidation and moisture. Using just one gas instead of both argon
and helium also saves you money in gas costs and limits the risk of leaks when
transporting or storing your equipment as there are no other gases needed to
store compared to arc welders and they reduce corrosion with no other gases
required. -
Sale!
Add to QuoteMIG welding , is an abbreviation for “Metal Inert Gas” which is more
formally known as “Gas Metal Arc Welding” or “GMAW”. The term MIG comes from
the original shielding gasses used that were the inert, or Nobel, gasses. Today
the gases used vary, so the name has officially been changed to “Gas Metal Arc
Welding”. MIG welding is the slang term that is commonly accepted. It is also
known as “Wire Wheel Welding”. This process uses a wire feed to feed solid
filler wire to the weld joint.MIG welding is an excellent choice for all types of metals, and with the
benefits of a single pass there is little need for any additional shielding
gas. As the weld shrinks, the gasses escape from the joint, leaving it fully
protected from oxidation and moisture. Using just one gas instead of both argon
and helium also saves you money in gas costs and limits the risk of leaks when
transporting or storing your equipment as there are no other gases needed to
store compared to arc welders and they reduce corrosion with no other gases
required. -
Sale!
Add to QuoteMIG welding , is an abbreviation for “Metal Inert Gas” which is more
formally known as “Gas Metal Arc Welding” or “GMAW”. The term MIG comes from
the original shielding gasses used that were the inert, or Nobel, gasses. Today
the gases used vary, so the name has officially been changed to “Gas Metal Arc
Welding”. MIG welding is the slang term that is commonly accepted. It is also
known as “Wire Wheel Welding”. This process uses a wire feed to feed solid
filler wire to the weld joint.MIG welding is an excellent choice for all types of metals, and with the
benefits of a single pass there is little need for any additional shielding
gas. As the weld shrinks, the gasses escape from the joint, leaving it fully
protected from oxidation and moisture. Using just one gas instead of both argon
and helium also saves you money in gas costs and limits the risk of leaks when
transporting or storing your equipment as there are no other gases needed to
store compared to arc welders and they reduce corrosion with no other gases
required.