₹4,950.00
an advanced electronic system that optimizes battery performance by actively moving energy from higher-voltage cells to lower-voltage ones
Specification
Model Number:8-24S 4A
Brand Name:Enerky
Base Material:fiberglass
Copper Thickness:0.5-4OZ / 1 Oz / 2Oz or Custom
Board Thickness:0.2~6mm
Min. Hole Size:T/2mm / 0.2 Mm / 0.15mm or Custom
Min. Line Width:0.15mm / 0.1mm or Custom
Min. Line Spacing:0.15mm / 0.1mm/4mil or Custom
Surface Finishing:HASL,Immersion gold,Flash gold, plated silver, OSP
working voltage:1.0V-4.5V
suitable battery:LI ion, Lifepo4, LTO battery
Balance current:0-4A
High precision:±1mV
Standby power:0.1mA
weight:550g
Related products
-
Sale!
Add to QuoteAmbition weld Industries Manufacture High Quality Lithium Battery spot welding Machine for the uses a short cycle, high-current pulse to join nickel strips to Cell terminals. A very short but intense electrical current (usually 2–10 milliseconds) is sent through the electrodes and into the nickel strips. You can choose a spot welder based on your project’s needs Like
1. Portable Type 3 Kw
2. Portable Industrial Type 4 KW
3. Manual TAble Type 6KW
4. Pneumatic Table Type 6 KW
5. Pneumatic Free Size 8 KW -
Sale!
Add to QuoteAmbition weld Industries Manufacture High Quality Lithium Battery spot welding Machine for the uses a short cycle, high-current pulse to join nickel strips to Cell terminals. A very short but intense electrical current (usually 2–10 milliseconds) is sent through the electrodes and into the nickel strips. You can choose a spot welder based on your project’s needs Like
1. Portable Type 3 Kw
2. Portable Industrial Type 4 KW
3. Manual TAble Type 6KW
4. Pneumatic Table Type 6 KW
5. Pneumatic Free Size 8 KW -
Sale!
Add to Quote1) Each equipment can conduct constant current and constant voltage charging and constant current discharge tests on 512 batteries that meet the voltage range.
2) The constant current constant voltage power supply of the invention patent is adopted, and the switching from constant current to constant voltage has no impact. It is especially suitable for the charging requirements of lithium-ion batteries.
3) The equipment adopts AVR single chip computer as the control center and cooperates with the peripheral sampling circuit. It can not only be controlled by the superior computer. When the computer is connected to work, it can save the complete charge discharge curve of all channels, but also be separated from the superior computer and operated through the control panel to complete constant current and constant voltage charging, constant current discharge test, sorting according to time, etc.
4) Each battery has an independent constant current and constant voltage source, which forms a loop and does not affect each other.
5) Detect the voltage of each battery in real time. When charging, charge with constant current first. When the battery voltage reaches the set value, turn the smooth to constant voltage charging. When the set time or current termination conditions are met, the charging ends. During constant current discharge, when the battery voltage is lower than the set value, the discharge ends and the corresponding battery indicator light is on.
6) It has the function of power down protection, and can continue to run after an incoming call.
7) The power tube adopts d880, which is suitable for batteries requiring low discharge voltage, such as lithium iron phosphate battery.
8) The upper computer can set 32 step parameters and 256 cycles, and each upper computer can be connected with 1 ~ 20 sets of single chip microcomputer systems (Less than 10 sets are recommended).
9) Supporting software functions. -
Sale!
Add to QuoteAmbition weld Industries Manufacture High Quality Lithium Battery spot welding Machine for the uses a short cycle, high-current pulse to join nickel strips to Cell terminals. A very short but intense electrical current (usually 2–10 milliseconds) is sent through the electrodes and into the nickel strips. You can choose a spot welder based on your project’s needs Like
1. Portable Type 3 Kw
2. Portable Industrial Type 4 KW
3. Manual TAble Type 6KW
4. Pneumatic Table Type 6 KW
5. Pneumatic Free Size 8 KW -
Sale!
Add to QuoteThis is an MMA/ARC 300 inverter welding machine, commonly used for manual arc welding. It is a compact, portable, and powerful welding unit designed for industrial as well as workshop use.
Key features visible in the photo:
🔌 Multi-Voltage Support:
-
Works on 220V and 380V input power
-
Label also shows it can handle AC 120V–560V, meaning it is designed for wide-range voltage fluctuation.
🎛 Control Panel:
-
Two rotary knobs:
-
One for current (Amperage) adjustment
-
One for Arc force / fine tuning
-
-
A digital display for showing welding current.
⚡ Output Type:
-
MMA/ARC welding (also known as stick welding)
-
Two large output terminals (+ and –) for connecting the electrode holder and ground clamp.
🧰 Accessories Included:
-
A welding clamp (electrode holder)
-
A ground clamp
-
Heavy-duty connection cables neatly placed on top.
🏗 Build Quality:
-
The machine has a sturdy metal body with front heat-dissipation fins.
-
Yellow side panels for design and added strength.
🏢 Brand:
-
“AMBI WELD” or “AMBITON/AMBITION WELD INDUSTRIES”
-