• +91-9319418507

  • Plot No 1331, Faridabad, Haryana

  • Mon - Sat: 8.00AM - 06.00PM

Sale!

₹138,500.00

Drawn arc inverter technology reduces the weight by 50 % compared to welding units with transformer technology.
Minimized energy consumption – energy needed is reduced by 50 % compared to standard welding units with transformer technology.
Specifically designed for thicker sheets of about 2 mm or higher
“Energy package for larger studs, used on construction sites and workshops”

Drawn arc Torch
Heavy duty gun for construction sites.
Length compensation for stable welding results.

Features

➢ Joining of stud-type welding elements with a diameter 2 to 28 mm onto thin sheets, min. 0.5 mm. Mild steel, stainless steel and aluminium.
➢ "Short Cycle (SC)
➢ drawn arc stud welding"
➢ "High current, shorter
➢ duration of welding time"
➢ "The welding sequence is the same as the sequence of drawn arc welding (ARC),
➢ however, with relatively
➢ higher currents and shorter welding times (max. 100 ms).
➢ The short cycle drawn arc stud welding is very suitable for stud diameters up to 28 mm on thin metal sheets."
➢ The short and clean welding process does not require any type of machining grinding.
Catalog

https://www.ambitionweld.com/wp-content/uploads/2023/04/JSD-25.pdf
PARAMETER JCD-12 PARAMETER JSD-16 PARAMETER JSD-19 PARAMETER JSD-22 PARAMETER JSD-25 PARAMETER JSD-28
Input voltage V AC 415 + 15% Input voltage V AC 415 + 15% Input voltage V AC 415 + 15% Input voltage V AC 415 + 15% Input voltage V AC 415 + 15% Input voltage V AC 415 + 15%
Frequency 50/60 Hz Frequency 50/60 Hz Frequency 50/60 Hz Frequency 50/60 Hz Frequency 50/60 Hz Frequency 50/60 Hz
Stud welding range M3-M12 Stud welding range M5-M16 Stud welding range M5-M19 Stud welding range M5-M22 Stud welding range M5-M25 Stud welding range M5-M28
Power Supply 30 KVA Power Supply 55 KVA Power Supply 90 KVA Power Supply 95 KVA Power Supply 95 KVA Power Supply 130 KVA
Weld Time 10 – 500 Sec Weld Time 10 – 1600 Sec Weld Time 10 – 2500 Sec Weld Time 10 – 2500 Sec Weld Time 10 – 2500 Sec Weld Time 10 – 2500 Sec
Welding Speed 10 pcs/ min Welding Speed 6-18 pcs/ min Welding Speed 6-21 pcs/ min Welding Speed 6-21 pcs/ min Welding Speed 6-21 pcs/ min Welding Speed 6-21 pcs/ min
Phase Three Phase Three Phase Three Phase Three Phase Three Phase Three
Material M.S , S.S , Aluminium , Brass Material M.S , S.S , Aluminium , Brass Material M.S , S.S , Aluminium , Brass Material M.S , S.S , Aluminium , Brass Material M.S , S.S , Aluminium , Brass Material M.S , S.S , Aluminium , Brass
Current 300-900 Amps Current 200-1600 Amps Current 300-1800 Amps Current 300-2400 Amps Current 300-2500 Amps Current 300-2500 Amps
Cooling Air Cooling Air Cooling Air Cooling Air Cooling Air Cooling Air
Dimension(L*W*H) 520*410*490 Dimension(L*W*H) 550*410*590 Dimension(L*W*H) 820*600*780 Dimension(L*W*H) 925*600*780 Dimension(L*W*H) 965*600*780 Dimension(L*W*H) 1025*600*780
Weight 185 kg Weight 215 kg Weight 295 kg Weight 370 kg Weight 370 kg Weight 390 kg
Sale!

Related products

  • Sale!

    Smart Active balancer

    ₹4,990.00

    Up to 24s/72volt Battery Balancing
    Fast 4amps Balancing Current
    BMS Wire Direct Connector set
    Battery error detector smart Balancer
    Smart Phone Bluetooth Connection
    Battery support – NMC, LFP, LTO, PbAc

    Max balancer Current – 4amps

    Balancing Power -0.001v

    Add to Quote
    Quick View
  • Sale!

    512 Channels 5v 6amps Cell Grading Machine For Cylindrical Cell

    ₹814,850.00

    1) Each equipment can conduct constant current and constant voltage charging and constant current discharge tests on 512 batteries that meet the voltage range.
    2) The constant current constant voltage power supply of the invention patent is adopted, and the switching from constant current to constant voltage has no impact. It is especially suitable for the charging requirements of lithium-ion batteries.
    3) The equipment adopts AVR single chip computer as the control center and cooperates with the peripheral sampling circuit. It can not only be controlled by the superior computer. When the computer is connected to work, it can save the complete charge discharge curve of all channels, but also be separated from the superior computer and operated through the control panel to complete constant current and constant voltage charging, constant current discharge test, sorting according to time, etc.
    4) Each battery has an independent constant current and constant voltage source, which forms a loop and does not affect each other.
    5) Detect the voltage of each battery in real time. When charging, charge with constant current first. When the battery voltage reaches the set value, turn the smooth to constant voltage charging. When the set time or current termination conditions are met, the charging ends. During constant current discharge, when the battery voltage is lower than the set value, the discharge ends and the corresponding battery indicator light is on.
    6) It has the function of power down protection, and can continue to run after an incoming call.
    7) The power tube adopts d880, which is suitable for batteries requiring low discharge voltage, such as lithium iron phosphate battery.
    8) The upper computer can set 32 step parameters and 256 cycles, and each upper computer can be connected with 1 ~ 20 sets of single chip microcomputer systems (Less than 10 sets are recommended).
    9) Supporting software functions.

    Add to Quote
    Quick View
  • Sale!

    Spot Welding Machine

    ₹11,850.00

    Ambition weld Industries Manufacture High Quality Lithium Battery spot welding Machine for the uses a short cycle, high-current pulse to join nickel strips to Cell terminals. A very short but intense electrical current (usually 2–10 milliseconds) is sent through the electrodes and into the nickel strips. You can choose a spot welder based on your project’s needs Like
    1. Portable Type 3 Kw
    2. Portable Industrial Type 4 KW
    3. Manual TAble Type 6KW
    4. Pneumatic Table Type 6 KW
    5. Pneumatic Free Size 8 KW

    Add to Quote
    Quick View
  • Sale!

    Portable Ambi Weld Lithium Battery Spot Welding Machine

    ₹16,990.00

    Ambition weld Industries Manufacture High Quality Lithium Battery spot welding Machine for the uses a short cycle, high-current pulse to join nickel strips to Cell terminals. A very short but intense electrical current (usually 2–10 milliseconds) is sent through the electrodes and into the nickel strips. You can choose a spot welder based on your project’s needs Like
    1. Portable Type 3 Kw
    2. Portable Industrial Type 4 KW
    3. Manual TAble Type 6KW
    4. Pneumatic Table Type 6 KW
    5. Pneumatic Free Size 8 KW

    Add to Quote
    Quick View
  • Sale!

    Lithium Battery Spot Welding Machine CNC Type 8 KW Pneumatic

    ₹72,000.00

    Ambition weld Industries Manufacture High Quality Lithium Battery spot welding Machine for the uses a short cycle, high-current pulse to join nickel strips to Cell terminals. A very short but intense electrical current (usually 2–10 milliseconds) is sent through the electrodes and into the nickel strips. You can choose a spot welder based on your project’s needs Like
    1. Portable Type 3 Kw
    2. Portable Industrial Type 4 KW
    3. Manual TAble Type 6KW
    4. Pneumatic Table Type 6 KW
    5. Pneumatic Free Size 8 KW

    Add to Quote
    Quick View
TOP